Secundum specialem optimizationis formae PET bottle embryo formandi processum, vis eiectionis maior est et velocitas eiectionis celerior quam in structura magna eiectionis. Munus cum efficienti motore servo et importato efficienti systemate pumpae dentatae, conservatio energiae et aquae usque ad 20% et 50%, et minor strepitus. Cylindri et staterae structura specialiter descripta pro PET machina speciale et data elementorum operis respondentes sine intermissione interfaciunt, ut realizeretur operatio normalis sub pressione plasticizandi minore, minore currente et maiore capacitate productiva.
| Exemplum | Unitas | PET1500/228S7 | PET2300/328S7 | PET3100/328S7 | PET3100/388S7 | PET3100/458 S7 |
|---|---|---|---|---|---|---|
| INCIENDIUM AS | ||||||
| Screw diam | mm | 75 | 83 | 95 | 95 | 95 |
| RATIO SCROFAE L\/D | L/D | 24 | 24 | 24 | 24 | 24 |
| THEORETICUS IACTUS VOLUME | cm³ | 1262.5 | 1974.2 | 2585.8 | 2585.8 | 2585.8 |
| IACTUS PONDUS (PS) | g | 1515 | 2369 | 3103 | 3103 | 3103 |
| Oz | 53.4 | 83.6 | 109.5 | 109.5 | 109.5 | |
| Ratum injectionis | g/s* | 543 | 580 | 760 | 972 | 972 |
| Iniectio pressura | MPa | 118 | 138 | 105 | 105 | 105 |
| GLAMPING UNIT | ||||||
| Vis Comprimens | KN | 2880 | 3280 | 3280 | 3880 | 4580 |
| Foramen plaga | mm | 520 | 590 | 590 | 590 | 700 |
| Spatium inter sbarrae | mm | 630×600 | 680×680 | 680×680 | 730×730 | 830×830 |
| Dimensio tabulae mobilis | mm | 900×870 | 990×990 | 990×990 | 1060×1060 | 1180×1180 |
| Maxima altitudo formae | mm | 600 | 660 | 660 | 600 | 780 |
| Minima altitudo formae | mm | 300 | 300 | 300 | 300 | 350 |
| Plaga ejector | mm | 180 | 200 | 200 | 220 | 220 |
| Vi ejector | KN | 100 | 177 | 177 | 208 | 241 |
| Numerus clavorum expulsorium | 8+1 | 12+1 | 12+1 | 12+1 | 12+1 | |
| Alii | ||||||
| ANTLIA POTENTIA MOTOR | Kw | 36.5+40 | 39.4+56.3 | 39.4+72 | 39.4+72 | 72+72 |
| Hydraulica systematis pressura | MPa | 16 | 16 | 16 | 16 | 16 |
| Capacitas dolii olei | L | 450 | 500 | 500 | 550 | 600 |
| Vires calefactoris | Kw | 30.7 | 35.7 | 45.3 | 45.3 | 45.3 |
| Dimensiones machinae | m | 6.8×1.6×2.1 | 7.8×1.7×2.05 | 8.0×1.7×2.05 | 8.0×1.9×2.05 | 9.1×2.1×2.2 |
| Pondus machinae | T | 8.7 | 12.1 | 12.3 | 15.8 | 19.5 |
EN
